CPU 1.Support for Intel Core i7 processors in the LGA2011-3 package 2.L3 cache varies with CPU Chipset 1.Intel X99 Express Chipset Memory 1.8 x DDR4 DIMM sockets supporting up to 32 GB of system memory ( Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.) 2.4 channel memory architecture 3.Support for DDR4 3000(O.C.) / 2800(O.C.) / 2666(O.C.) / 2400(O.C.) / 2133 MHz memory modules 4.Support for non-ECC memory modules 5.Support for Extreme Memory Profile (XMP) memory modules 6.Support for RDIMM 1Rx8 memory modules (operate in non-ECC mode) Audio 1.Realtek ALC1150 codec 2.High Definition Audio 3.2/4/5.1/7.1-channel 4.Support for S/PDIF Out LAN 1.Qualcomm Atheros Killer E2201 chip (10/100/1000 Mbit) Expansion Slots 1.2 x PCI Express x16 slots, running at x16 (PCIE_1/PCIE_2) 2.1 x PCI Express x16 slot, running at x8 (PCIE_3) (When an i7-5820K CPU is installed, the PCIE_2 slot operates at up to x8 mode and the PCIE_3 operates at up to x4 mode.) (All PCI Express x16 slots conform to PCI Express 3.0 standard.) 3.1 x PCI Express x1 slot (The PCI Express x1 slot conforms to PCI Express 2.0 standard.) 4.1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI) Multi-Graphics Technology 1.Support for 2-Way AMD CrossFire/NVIDIA SLI technology Storage Interface Chipset: 1.1 x M.2 PCIe connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x2/x1 SSD support) 2.1 x SATA Express connector 3.6 x SATA 6Gb/s connectors (SATA3 0-5) 4.Support for RAID 0, RAID 1, RAID 5, and RAID 10 Chipset: 1.4 x SATA 6Gb/s connectors (sSATA3 0-3), supporting IDE and AHCI modes only (An operating system installed on the SATA3 0-5 ports cannot be used on the sSATA3 0-3 ports.) USB Chipset: 1.4 x USB 3.0/2.0 ports (available through the internal USB headers) 2.10 x USB 2.0/1.1 ports (6 ports on the back panel, 4 ports available through the internal USB headers) Chipset + Renesas uPD720210 USB 3.0 Hub: 1.4 x USB 3.0/2.0 ports on the back panel Internal I/O Connectors 1.1 x 24-pin ATX main power connector 2.1 x 8-pin ATX 12V power connector 3.1 x M.2 Socket 3 connector 4.1 x SATA Express connector 5.10 x SATA 6Gb/s connectors 6.1 x CPU fan header 7.1 x water cooling fan header (CPU_OPT) 8.3 x system fan headers 9.1 x front panel header 10.1 x front panel audio header 11.1 x S/PDIF Out header 12.2 x USB 3.0/2.0 headers 13.2 x USB 2.0/1.1 headers 14.1 x Clear CMOS jumper 15.1 x power button 16.1 x reset button 17.1 x Clear CMOS button 18.1 x audio gain control switch 19.2 x BIOS switches Back Panel Connectors 1.1 x PS/2 keyboard port 2.1 x PS/2 mouse port 3.6 x USB 3.0/2.0 ports 4.4 x USB 2.0/1.1 ports 5.1 x RJ-45 port 6.1 x optical S/PDIF Out connector 7.5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In) 8.2 x Wi-Fi antenna connector holes I/O Controller 1.iTE I/O Controller Chip H/W Monitoring 1.System voltage detection 2.CPU/System/Chipset temperature detection 3.CPU/CPU OPT/System fan speed detection 4.CPU/System/Chipset overheating warning 5.CPU/CPU OPT/System fan fail warning 6.CPU/CPU OPT/System fan speed control ( Whether the fan speed control function is supported will depend on the cooler you install.) BIOS 1.2 x 128 Mbit flash 2.Use of licensed AMI UEFI BIOS 3.Support for DualBIOS 4.PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 Operating System 1.Support for Windows 8.1/8/7 Form Factor 1.Micro-ATX Form Factor 24.4cm x 24.4cm Item Dimension (L"xW"xH"): 11 x 11 x 3 Weight: 4.2 lb Warranty Information: 3 years
|