Processor/Cache CPU: - Single Socket H4 (LGA 1151) supports: Intel Xeon processor E3-1200 v5, Intel 6th Gen Core i3, Intel Pentium, Intel Celeron processors - CPU TDP up to 80W System Memory Memory Capacity: - 4x 288-pin DDR4 DIMM slots - Up to 64GB DDR4 ECC UDIMM Memory Type: 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs DIMM Sizes: 16GB, 8GB, 4GB Memory Voltage: 1.2V Error Detection: - Corrects Single-Bit Errors - Detects Double Bit Errors (Using ECC Memory) On-Board Devices Chipset: Intel C236 Chipset SATA: - SATA3 (6Gbps) via C236 controller - RAID 0, 1, 5, 10 support IPMI: - Support for Intelligent Platform Management Interface v.2.0 - IPMI 2.0 with virtual media over LAN and KVM-over-LAN support - ASPEED AST2400 BMC Network Controllers: - Dual Intel I210-AT Gigabit Ethernet LAN ports -Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Graphics: Aspeed AST2400 BMC Input/Output SATA: 8x SATA3 (6Gbps) ports LAN: - 2x RJ45 Gigabit Ethernet LAN ports USB: - 5x USB 3.0 ports (2 rear + 2 via header + 1 Type A) - 6x USB 2.0 ports (2 rear + 4 via headers) VGA: 1x VGA port Serial Port/Header: 2x COM ports (1 rear, 1 header) SuperDOM: - 2x SuperDOM (Disk on Module) ports with built-in power TPM: 1x TPM 1.2 20-Pin Header Expansion Slots PCI-Express: - 1x PCI-E 3.0 x8 (in x16) slot - 1x PCI-E 3.0 x8 slot - 1x PCI-E 3.0 x4 (in x8) slot System BIOs BIOs Type: 128Mb SPI Flash EEPROM with AMI BIOS BIOs Features: - Plug and Play (PnP) - APM 1.2 - DMI 2.3 - PCI 2.3 - ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support - Hardware BIOs Virus Protection - SMBIOS 2.7.1 - UEFI 2.3.1 - RTC (Real Time Clock) Wakeup Management Software: - IPMI 2.0 with KVM Support - NMI - Watch Dog - Super Doctor 5 Power Configurations: - ACPI Power Management - Keyboard Wakeup from Soft-Off - CPU Fan auto-off in sleep mode - Power-on mode for AC power recovery PC Health Monitoring Voltage: Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. FAN: - Total of 5 fan headers supporting up to 5 fans 5 fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors Temperature: - Monitoring for CPU and chassis environment - CPU thermal trip Support - I2C temperature sensing logic - Thermal Monitor 2 (TM2) support - PECI LED: - CPU / System Overheat LED - Suspend Static Trip Support - UID/Remote UID Other Features: - Chassis Intrusion Detection - Chassis Intrusion Header - Chipkill Support - RoHS Form Factor MicroATX Item Dimension (L"xW"xH") 10 x 10 x 1 Weight 5.00 lb Warranty Information 1 Year
|